Assembly And Setup; S Series Upright Bike Assembly And Setup; Manager Mode - Star Trac S-UBx Owner's Manual

M / M
ANAGER AINTENANCE
After using your STAR TRAC S SERIES BIKE for a period of time, you may wish to change some of its settings.

MANAGER MODE

The Manager Settings allow you to query and modify the basic settings of your bike. To enter Manager Settings:
1. Press and hold the , and keys together.
2. A beep will sound and "MANAGER SETTINGS" will scroll once across the P
3. Release all keys. "SN" will display in the P
ROFILE
in the D Window.
ISTANCE
NOTE: The system will automatically exit Manager Settings if no key is pressed for 30 seconds.
The following keys are used to modify MANAGER SETTINGS:
Increase and Decrease Level Keys: Display the next (Increase) and previous (Decrease) parameters. Keys will
repeat if held.
Numeric Keypad: Facilitates entry of the desired value for the displayed parameter. These keys do not save the
new value – see OK Key below.
OK Key: Updates (saves) the value of the displayed parameter in Flash memory. "UPDATING" will scroll once
across the P Window while the update is in process. When the update is complete, the P
ROFILE
show the new value for the parameter.
NOTE: To exit MANAGER SETTINGS without saving any values or settings, press the Q
NOTE: Unless otherwise specified, the Item (parameter) name is shown in the P
shown in the D Window.
ISTANCE
The items that you may display and change with the previous keys are:
Lowest Highest Default
Item Value Value Value Meaning
SN 0 9999 N/A Serial Number. S Series Bike serial number (set by factory).
DSW 1.0 99.99 N/A
Display Software. Display panel software version number (set by factory).
NOTE: Software checksum value is displayed in C
OHR 0 9999 0 Operating Hours. Total operating hours.
DST 0 9999 0
Distance. Total distance ridden in miles or kilometers, based on current UNx
setting.
UNx UNE UNM UNE Units. UNE (English) = units of pounds, miles, feet, inches
NOTE: Current Value is shown in P
TIM 5 99 99
Time. Maximum time in minutes allowed for a program, excluding warm-up
and cooldown.
WGT
1 (lb) 500 (lb) 155 (lb) Default Weight (to user). Typical weight in lb (UNx = UNE) or kg (UNx =
1 (kg) 226 (kg) 70 (kg) UNM).
Lxx N/A N/A LEN
Language. Display language; either LEN (English), LGE (German), LSP
(Spanish), LDU (Dutch), LPO (Portuguese), LFR (French), LIT (Italian), LSW
(Swedish) or LKA (Katakana).
LOE OFF ON OFF Lockout Enable. Enables/disables lockout function.
LOI 001 999 001 Lockout ID. Lockout override identification number.
30
M
ODE
Window.
ROFILE
Window; the associated numeric value for the parameter will display
ROFILE
S key.
UICK TART
Window, and the value of the parameter is
ROFILE
Window.
ALORIES
UNM (Metric) = units of kilograms, kilometers, centimeters
Window.
ROFILE
STAR TRAC S SERIES BIKES O
WNER
A
SSEMBLY AND
S SERIES UPRIGHT BIKE

ASSEMBLY AND SETUP

Use the following procedures to unpack and assemble your STAR TRAC
S-UB / S-UBx UPRIGHT BIKE.
U
NPACKING
Open the shipping carton, remove all parts from the carton and foam
inserts, and verify that the following parts are included in your shipment:
Description
Bike Frame
Display Console Assembly
Seat Post Assembly
Front Foot
Window will
Rear Foot
Pedals (set of two)
Screw, Button Head, M10 X 30
Screw, Flat Head, M6 X 16
Screw, Socket Head, M6 X 10
T R
OOLS EQUIRED
Most STAR TRAC bikes can be assembled using the following tools:
Metric Hex Key Wrenches
n
Metric Open-End Wrenches
n
Metric Ratchet Socket Wrench Set
n
Torque Wrench
n
Your STAR TRAC S-UB / S-UBx UPRIGHT BIKE includes a hex key set and combination open-end wrench.
A
SSEMBLY
1. Install the Front Foot
NOTE: The front foot assembly has wheels attached to the front
edge. Be sure the wheels face forward when installing the front foot
assembly.
Stand the bike frame upright and place the front foot assembly
under the frame, aligning the holes in the foot with the holes in
the frame.
NOTE: It may be necessary to raise the frame slightly to align the
holes in the frame with the mating holes in the front foot.
Using four M10 X 30 button head screws, secure the front foot
assembly to the frame. Tighten all four screws securely.
' M STAR TRAC S SERIES BIKES O
S ANUAL
S
ETUP
Qty
1
1
1
1
1
1
8
4
1
Channel Lock Pliers
n
Vice Grip Pliers
n
Rubber Mallet
n
Phillips Head Screwdriver
n
' M
WNER S ANUAL
Step 1
11