Upper Basket Feed Pipe; Siphon Break - GE Monogram ZBD6400 Series Technical Service Manual

6000 & 7000 Series DISHWASHERS
5.2.17.4 Slide the Rail Guides out and clear from the Wheel
Guides.
5.2.17.5 Remove the Wheel Guide Axles as shown below.
5.2.17.6 Ensure the stainless steel cup washer, which
houses the rubber "O" ring, is identified with the recess side
of the washer to the surface of the stainless steel tub.
5.2.17.7 Refer to the illustration below for the correct assem-
bly of the Wheel Guide Axle, Wheel Guide, stainless steel
cup washer and rubber "O" ring.
5.2.17.8 Reassemble the dishwasher in reverse order.
5.2.17.9 Operate and test dishwasher before leaving.

5.2.18 Upper Basket Feed Pipe

The Upper Basket Feed Pipe is a polyethylene blow mould-
ing mounted on the top external surface of the stainless steel
tub and is retained in position by the screwed Spray Nozzle
which is located on the top internal surface of the stainless
steel tub. A neoprene sealing washer is fitted to the threaded
and flanged outlet spigot of the Upper Basket Feed Pipe,
which is compressed by the threaded spray nozzle and
forms an effective seal between the external surface of the
stainless steel tub and the flange of the Upper Basket Feed
Pipe.
The photo below shows the Upper Basket Feed Pipe and
spray nozzle removed from the stainless steel tub.
Feed Pipe

5.2.19 Siphon Break

Hinged flap to vent stainless steel tub.
Circular Rubber Gasket
Spray Nozzle
Siphon Break Nut
Hose Spigots
PAGE 43