GE Monogram ZBD6400 Series Technical Service Manual page 57

6000 & 7000 Series DISHWASHERS
5.2.35.7 The Wash Motor/Pump can then be withdrawn from
the pump cover inlet hose, as shown below, and lifted clear as
a complete assembly.
5.2.35.8 Reinstall the Wash Motor/Pump and reassemble the
dishwasher in reverse order or refer to section 5.2.34 if the
Wash Motor/Pump needs to be dismantled.
Note: On reassembly make certain the hose clamp cut
ends are located away from the Turbidity Hose or a leak
may occur.
CAUTION. Test for water leaks before leaving.
5.2.35.10 Operate and test dishwasher before leaving.
PAGE 55