Cabinet Trims & Wrap Removal - GE Monogram ZBD6400 Series Technical Service Manual

6000 & 7000 Series DISHWASHERS
5.2.8 Cabinet trims and wrap removal, all models
CAUTION. Switch off electrical power supply
5.2.8.1 Open the dishwasher door. Remove the 4 Phillips
head screws from the stainless steel trim in the left hand side
and right hand side of the top corners of the cabinet. Then lift
the top trim clear of the cabinet.
Cabinet
Top cabinet trim LHS
5.2.8.2 Remove the Phillips head screw from each of the left
hand and right hand stainless steel trims, just above the open
dishwasher door. Then lift the side trims clear of the cabinet.
LH Side
cabinet trim
Door hinge
5.2.8.3 Remove the 12 Phillips head screws from the front
flanges of the cabinet wrap.
Cabinet wrap,
front flanges
5.2.8.4 Remove the 8 Phillips head screws from the rear
flanges of the cabinet wrap.
Cabinet wrap, top
and side rear flanges
Cabinet wrap,
lower rear
flanges
5.2.8.5 Lay the dishwasher carefully on its back. Remove the
8 Phillips head screws from the bottom flanges of the cabinet
wrap.
Cabinet wrap,
bottom rear
flanges
5.2.8.6 Pull the cabinet wrap cabinet flanges carefully away
from the sides of the dishwasher. Slide the cabinet wrap to
the top and clear of the dishwasher tub.
Insulation
blanket
Cabinet wrap
5.2.8.7 Lift the cabinet insulation blanket clear of the tub.
Reassemble the dishwasher in the reverse order.
Tub
PAGE 38