GE Monogram ZBD6400 Series Technical Service Manual page 63

6000 & 7000 Series DISHWASHERS
5.2.44 Door Lock Microswitch - 7000, 7005, 7100 &
7105 Models
CAUTION. Switch off electrical power supply.
5.2.44.1 Remove the outer door panel. Undo the single
Phillips head screw securing the Microswitch and Latch
Housing assembly.
5.2.44.2 Remove both 1/4" terminals and wires from the
Microswitch. Pry open the clip holding the Microswitch in the
Latch Housing with a small screwdriver, then remove the
Microswitch.
5.2.44.3 Reassemble the dishwasher in reverse order.
5.2.44.5 Operate and test dishwasher before leaving.
5.2.45 Door Lock Microswitch Lever - 6400, 6500,
6700, 6900, 6905, 6600 & 6605 Models
CAUTION. Switch off electrical power supply.
5.2.45.1 To remove the Door Lock Microswitch Lever, first
remove the Door Lock Microswitch (Section 5.2.50).
5.2.45.2 Exert pressure against the flanged head of the pivot
point of the Microswitch Lever. The pivot point will spring
from the Control Panel Carrier Frame.
5.2.45.3 Twist the Microswitch Lever and remove from the
front central square aperture of the Control Panel Carrier
Frame.
5.2.45.4 Reassemble the dishwasher in reverse order.
CAUTION. Link L and N before testing for live
connections to earth (ground) before leaving.
5.2.45.5 Operate and test dishwasher before leaving.
PAGE 61