Safety; Warning; Safety Practices - GE Monogram ZBD6400 Series Technical Service Manual

6000 & 7000 Series DISHWASHERS

2.0 SAFETY

2.1 WARNING

All work on electrical or plumbing systems must be carried
out by persons so qualified and in accordance with the
Federal, State or local authority legislation which applies.
Always ensure that the power supply box for the unit has
correct polarity and is within sight and reach of the unit being
serviced.

2.2 SAFETY PRACTICES

Ensure that the unit is ELECTRICALLY SAFE and there are
no WATER LEAKS before and after carrying out any service
work. When electrical power is required to be connected for
diagnosis or test purposes, disconnect the power immedi-
ately after use.
When carrying out tests on unit, ensure that high voltages do
not come into contact with low voltage circuit.
Do not operate unit with any panels removed other than the
kick panel and front panel.
At the beginning and/or end of each service procedure, the
appropriate icons below will appear as a reminder to
observe safe practices when servicing the unit.
Turn water supply off at main or isolating valve
.
Test for water leaks before leaving.
Switch off electrical power supply.
Reassemble dishwasher in reverse order.
Operate and test dishwasher before leaving.
PAGE 9