Yamaha CW50L Service Manual page 89

STARTER MOTOR
4. Starter relay: (_ O-ring
• Disconnect the Blue/White lead from the _ Brush
wire harness. _ Armature coil
• Connect the (-) _ terminal of the battery to _ O-ring
the Blue/White lead.
• Check the starter motor operation.
A COMMUTATOR UNDER
CUT:
DOES NOT WORK 1.15 mm (0.045 in)
- B COMMUTATOR DIAMETER
WEAR LIMIT:
--I::>uw I Replace the starter relay. I 15.0 mm (0.60 in)
37_ , C BRUSH WEAR LIMIT:
5.3 mm (0.21 in)
_ CORRECT _::_::::_ ..................._3(_
I 5. Main switch: J INCORRECT _/(_) _m_.
I Refer to "SWITCH INSPECTION". _ kg, 9.4 _
,_ CORRECT I Replace the main switch. I
I 6. Engine stop switch: I INCORRECT ___@ !
I Refer to "SWITCH INSPECTION". ,8,
,_ CORRECT I Replace right handlebar switch. I
17 Startersw,tc.:
INCORRECT _/_,-_,
Refer to "SWITCH INSPECTION". _
,_ CORRECT i Replace right handlebar switch. I ___/
8.Connections: POORCONNECTIONS
Check all connections in the starter system. _ _/
Refer to "CIRCUIT DIAGRAM".
T
IRepa'r. I
7-13 7-14