Yamaha CW50L Service Manual page 35

E.O,.E.EMOV.L IE"O ''1 IC'I E.O,.E.EMOV.L
ENGINE OVERHAUL CABLES, LEADS AND HOSES
ENGINE REMOVAL
1. Remove:
• Oil hose (_ on oil pump side
COVER REMOVAL
1. Remove: NOTE:
• Covers Plug the hose to prevent oil spillage.
Refer to "COVERS" in CHAPTER 3.
CA RBUR ETOR ______,__ 2. Disconnect:
1. Remove: • Earth (ground lead)
• Air cleaner case assembly (_) • Spark plug cap 0
• Starter motor lead (_)
• CDI magneto lead (_)
• Carburetor cover _ - _._ \ • Rear brake cable (_
• Hoses __ %
• Carburetor top __
3. Remove:
• Carburetor (_
/_ 4. Remove:
__ ° Exhaust protector
° Air shroud (_)
(_) • Muffler assembly (_)
5. Loosen:
o Rear axle nut (_
NOTE:
Apply the rear brake while loosening the rear
axle nut
4-1 4-2