Yamaha CW50L Service Manual page 18

OASLERO°T, NO I SPECl;] IB'3 Is'c
(_) Choke cable [] Tie the choke cable,throttle cable, rear brake cable, and speedometer
(_) Throttle cable cable to the left side of the handlebar.
® Rear brake cable [] Pass the wire harness along the right side of the handlebar.
(_ Speedometer cable [] Clamp the front brake hose to the lower cover.
® Front brake hose [] The speedometer cable must pass belween the steering tube and the
(_ Main switch main switch bracket.
(_) Wire harness [] Attach the wire harness to the side of the main switch bracket with a band.
® Horn [] The wire harness must run straight (no loops)between the two bands.
® Steedng tube [] Attach the wire hamess with a band to the steedng tube just above the
Lower cover wire bracket.
[] The speedometer cable must pass through the hole in the front fender.
[] The speedometer cable must pass through the hole in the lower fender.
[] The horn leads must pass behind the horn bracket and behind the wire
bracket.
[] The front brake hose must pass through the wire bracket.
[] The front brake hosde must pass through the hole in the fender.
T
I I = .....
2-11