Yamaha CW50L Service Manual page 17

Hide thumbs Also See for CW50L:
Table of Contents

Advertisement

CA..E.OUT,.O
IS" clPI IB'2
CA°LE.O°T,.O
IS"EclP
_3) Rim
[]
Do not cover the frame number.
_)
Handlebar
[]
The right handlebar switch leads must pass along the underside
_) Tire
[]
Attach the brake hose, starter switch cable and the brake cable
_)
Left handle bar switch
of the handlebar, then behind the boss on the lower handlebar
®
Brake disc
together behind the horn bracket.
®
Right handlebar switch
cover.
Brake caliper
[]
The throttle cable must have sufficient free play.
_)
Handlebar wire harness holder
[]
Pass the couplers behind the speedometer cable, and after
_) Brake hose guide (Lower)
[]
Clamp the brake hose into the upper holder.
_
Flasher relay
connecting them, fit them under the right side of the
®
Brake hose guide (Upper)
[]
With a band tie the choke cable, the throotle cable and the rear
_)
Speedometer cable
speedometer.
Throttle cable
brake cable to the left side, the wire harness to the right side of
_)
Throttle cable
[]
The left handlebar switch leads must pass along the underside of
®
Wire harness
the frame.
®
Lower handlebar cover
the handlebar, then in front of the boss on the lower handlebar
Speedometer cable
(9) Front brake hose
cover.
Brake hose
_
Flasher ground
[]
Attach the front flasher ground to the handlebar.
_) Choke cable
[]
The throttle cable must pass in front of the handlebar.
[]
Pass the flasher relay leads under the handlebar.
@ Rear brake cable
[]
The brake light leads must pass along the underside of the
handlebar (left and right).
[]
The wire harness holder must pass over the handlebar.
[]
The brake hose union bolt must touch the right side of the boss.
o
I
%
[]
2-9
2-10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents