Circuit Implementations
Figure 25.
Bandgap Analog Voltage Filter Circuit
Note: Ground VSSBGPE at capacitor
Note: .
•
Place C as close as possible to package pin.
•
R must be placed between the 2.5V supply and L.
•
Route VCCBGPE and VSSBGPE as differential traces.
•
VCCBGPE and VSSBGPE traces must be ground referenced (No 2.5V references).
•
VSSBGPE should be grounded at the capacitor.
•
Max total board trace length = 1.2".
•
Min trace space to other nets = 30 mils.
52
Board Trace:
Trace Width > 25 mils
Trace Spacing < 10 mils
Trace Length < 600 mils
Board Route
2.5 V
Traces
L
R
C
VSS
Intel® 41210 Serial to Parallel PCI Bridge Design Guide
Breakout Trace:
Trace Width > 6 mils
Trace Spacing < 6 mils
Trace Length < 600 mils
Breakout
Traces
VCCBGPE
Intel
41210
fi
Bridge
VSSBGPE
B2726 -01