Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for IBASE Technology ARRANDALE IB957
Summary of Contents for IBASE Technology ARRANDALE IB957
- Page 1 IB957 Intel Arrandale /PCH ® 5.25” Motherboard USER’S MANUAL Version 1.0...
- Page 2 AMI is a registered trademark of American Megatrends Inc. PS/2 is a trademark of International Business Machines Corporation. Intel and Intel® Arrandale DC Mobile Processor are registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation.
-
Page 3: Table Of Contents
Setting the Jumpers ... 8 Connectors on IB957 ... 12 BIOS Setup Drivers Installation Intel Chipset Software Installation Utility... 52 VGA Drivers Installation ... 54 Realtek HD Audio Driver Installation ... 56 LAN Drivers Installation ... 57 Intel® Management Engine Interface ... 60 Appendix ... - Page 4 IMPORTANT NOTE: When the system boots without the CRT being connected, there will be no image on screen when you insert the CRT/VGA cable. To show the image on screen, the hotkey must be pressed (CTRL-ALT-F1). IB957 User’s Manual...
-
Page 5: Introduction
Introduction Product Description The IB957 5.25” Disk-Size SBC is a high performance Intel® Core™ i7-610E (2.53GHz/4MB) Processor-based IB957 5.25” Disk-Size SBC with the mobile Intel® QM57 Express Chipset. It is designed for a range of automation, industrial, and medical applications. The Intel® Core™ i7 Mobile processor has an optimized integrated graphics solution. -
Page 6: Checklist
INTRODUCTION Checklist Your IB957 package should include the items listed below. • The IB957 SBC • This User’s Manual • 1 CD containing chipset drivers and flash memory utility • Serial port cable (Part # PK1HK, 30cm) • SATA cable (Part # SATA-7F, 46cm) IB957 User’s Manual... -
Page 7: Ib957 Specifications
PCH built-in USB 2.0 host controller, support 12 ports Serial ATA Ports PCH built-in SATA controller, supports 4 ports IAMT6.0 PCH built-in Intel Active Management Technology VER 6.0 with HW KVM(MI957-i7-610E only) Audio PCH built-in High Definition audio controller: ALC888 w/ 5.1 channels... -
Page 8: Board Dimensions
INTRODUCTION Board Dimensions IB957 User’s Manual... - Page 9 INTRODUCTION IB957 User’s Manual...
-
Page 10: Installations
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB957 in order to set up a workable system. The topics covered are: Installing the Memory ... 7 Setting the Jumpers ... 8 Connectors on IB957 ... 12 IB957 User’s Manual... -
Page 11: Installing The Memory
Installing the Memory The IB957 board supports two DDR3 memory socket for a maximum total memory of 8GB in DDR3 w/ECC DIMM memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1. -
Page 12: Setting The Jumpers
INSTALLATIONS Setting the Jumpers Jumpers are used on IB957 to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB957 and their respective functions. Jumper Locations on IB957 ... -
Page 13: Jumper Locations On Ib957
INSTALLATIONS Jumper Locations on IB957 Jumpers on IB957 ... Page JP2: LCD Panel Power Selection ... 10 JP3, JP4, JP5: RS232/422/485 (COM2) Selection ... 10 JBAT1: Clear CMOS Setting ... 11 IB957 User’s Manual... -
Page 14: Jp2: Lcd Panel Power Selection
INSTALLATIONS JP2: LCD Panel Power Selection JP3, JP4, JP5: RS232/422/485 (COM2) Selection COM1 is fixed for RS-232 use only. COM2 is selectable for RS232, RS-422 and RS-485. The following table describes the jumper settings for COM2 selection. COM2 Function Jumper Setting (pin closed) IB957 User’s Manual... -
Page 15: Jbat1: Clear Cmos Setting
COM2 is jumper selectable for RS-232, RS-422 and RS-485. Pin # JBAT1: Clear CMOS Setting JBAT1 IB957 User’s Manual Signal Name RS-232 R2-422 Ground Ground RTS- RTS+ CTS+ CTS- Setting Normal Clear CMOS INSTALLATIONS RS-485 DATA- DATA+ Ground... -
Page 16: Connectors On Ib957
INSTALLATIONS Connectors on IB957 Connector Locations on IB957 ... 13 CN1: DC Adapter Connector ... 14 CN2: DVI-D and VGA Connector ... 14 HDMI1: HDMI Connector ... 15 CN3: USB11/12 Ports ... 15 J2: DisplayPort Connector ... 15 CN4: USB6/7/8/10 Ports ... 15 USB_LAN1: 10/100/1000 RJ-45 and USB9/13 Ports ... -
Page 17: Connector Locations On Ib957
INSTALLATIONS Connector Locations on IB957 IB957 User’s Manual... -
Page 18: Cn1: Dc Adapter Connector
INSTALLATIONS CN1: DC Adapter Connector CN1 provides DC12V that provide system power +5,+3.3,+12V,5VSB CN2: DVI-D and VGA Connector Signal Name DATA 2- DATA 2+ Shield 2/4 DATA 4- DATA 4+ DDC CLOCK DDC DATA DATA 1- DATA 1+ SHIELD 1/3 DATA 3- DATA 3+ DDC POWER... -
Page 19: Hdmi1: Hdmi Connector
HDMI1: HDMI Connector Signal Name Pin # DATA 2- DATA 2+ Shield 2/4 DATA 4- DATA 4+ DDC CLOCK DDC DATA DATA 1- DATA 1+ SHIELD 1/3 DATA 3- CN3: USB11/12 Ports J2: DisplayPort Connector CN4: USB6/7/8/10 Ports USB_LAN1: 10/100/1000 RJ-45 and USB9/13 Ports CN5: Audio Connector The audio connector, from top to bottom, is composed of Line in, Line out and Microphone jacks. -
Page 20: Com3_Com4: Com3, Com4 Serial Port
INSTALLATIONS COM3_COM4: COM3, COM4 Serial Port Signal Name SYS_FAN1: System Fan Power Connector This is a 3-pin header for system fans. The fan must be a 12V (500mA). CPU_FAN1: CPU Fan Power Connector This is a 3-pin header for the CPU fan. The fan must be a 12V fan. IB957 User’s Manual Pin # Pin #... -
Page 21: J1 (F_Panel): System Function Connector
J1 (F_PANEL): System Function Connector J1 provides connectors for system indicators that provide light indication of the computer activities and switches to change the computer status. J2 is a 20-pin header that provides interfaces for the following functions. Hard Disk Drive LED Not Defined Not Defined Speaker: Pins 1 - 4... - Page 22 INSTALLATIONS ATX Power ON Switch: Pins 7 and 17 This 2-pin connector is an “ATX Power Supply On/Off Switch” on the system that connects to the power switch on the case. When pressed, the power switch will force the system to power on. When pressed again, it will force the system to power off.
-
Page 23: J3: Lcd Backlight Connector
J3: LCD Backlight Connector Pin # J4, J5: +12V and +5V Output Power Connectors J6: Printer Port Connectors J7: SPI Flash Connector (factory use only) J8: CD-In Pin Header Pin # J9: PS/2 Keyboard/Mouse Connector IB957 User’s Manual Signal Name +12V Backlight Enable Brightness Control... -
Page 24: J10: Digital I/O
INSTALLATIONS J10: Digital I/O Signal Name OUT3 OUT2 J11: Front Audio Connector Signal Name MIC2_L MIC2_R Line2_L Sense Line2_R J12: PCI-E(x1) Slot J13: SPDIF Out Connector JMINI: Mini PCIE Connector SATA1, SATA2, SATA3, SATA4: SATA Connectors IB957 User’s Manual Signal Name OUT1 OUT0 Pin #... -
Page 25: F_Usb1: Usb1/Usb5 Connector
F_USB1: USB1/USB5 Connector F_USB2: USB0/USB3 Connector COM1,COM2: COM1,COM2 Serial Port Signal Name DCD, Data carrier detect RXD, Receive data TXD, Transmit data DTR, Data terminal ready GND, ground IB957 User’s Manual Signal Name Ground Signal Name Ground COM2 Pin # Pin # INSTALLATIONS Signal Name... -
Page 26: Lvds1, Lvds2: Lvds Connectors (1St Channel, 2Nd Channel)
INSTALLATIONS LVDS1, LVDS2: LVDS Connectors (1st channel, 2nd channel) The LVDS connectors on board consist of the first channel (LVDS1) and second channel (LVDS2). Signal Name TX0- Ground TX1- 5V/3.3V TX3- TX2- Ground TXC- 5V/3.3V +12V IB957 User’s Manual Pin # Pin # Signal Name TX0+... -
Page 27: Bios Setup
BIOS Setup This chapter describes the different settings available in the AMI BIOS that comes with the board. The topics covered in this chapter are as follows: BIOS Introduction ... 24 BIOS Setup ... 24 Main BIOS Setup ... 25 Advanced Settings ... -
Page 28: Bios Introduction
BIOS Introduction The BIOS (Basic Input/Output System) installed in your computer system’s ROM supports Intel processors. The BIOS provides critical low-level support for a standard device such as disk drives, serial ports and parallel ports. It also password protection as well as special support for detailed fine-tuning of the chipset controlling the entire system. -
Page 29: Main Bios Setup
Main BIOS Setup This setup allows you to record some basic hardware configurations in your computer system and set the system clock. Main Advanced Chipset BIOS INFORMATION BIOS Vendor Memory Information Total Memory System Date System Time Access Level Note: If the system cannot boot after making and saving system changes with Setup, the AMI BIOS supports an override to the CMOS settings that resets your system to its default. -
Page 30: Advanced Settings
► ACPI Settings ► Wake up event setting ► CPU Configuration ► SATA Configuration ► Thermal Configuration ► Intel IGD SWSCI OpRegion ► Intel TDT(AT-p) Configurations ► USB Configuration ► Super IO Configuration ► H/W Monitor ► Intelligent Power Sharing ►... -
Page 31: Pci Latency Timer
PCI Subsystem Settings This section allows you to configure the PCI, PCI-X and PCI Express settings. Advanced Main Chipset PCI Bus Driver Version PCI ROM Priority PCI Common Settings PCI Latency Timer PCI Express Device Settings Extended Tag No Snoop Maximum Payload Maximum Read Request PCI Express Link Settings... - Page 32 BIOS SETUP PCI Express Link Settings Set Maximum Read Request Size of PCI Express Device or allow System BIOS to select the value. ASPM Support Set the ASPM Level: Force L0 – Force all links to L0 State AUTO – BIOS auto configure DISABLE –...
-
Page 33: Acpi Settings
ACPI Settings Advanced Main Chipset Enable ACPI Auto Configuration ACPI Sleep State Enabled ACPI Auto Configuration Enables or Disables BIOS ACPI Auto Configuration. ACPI Sleep State Select the highest ACPI sleep state the system will enter, when the SUSPEND button is pressed. IB957 User’s Manual Aptio Setup Utility Boot... -
Page 34: Wake On Ring
BIOS SETUP Wake up event settings Advanced Main Chipset Wake system with Fixed Time Wake up hour Wake up minute Wake up second Wake on Ring Wake on PCI PME Wake on PCIE Wake Event Wake system with Fixed Time Enables or Disables System wake on alarm event. -
Page 35: Cpu Configuration
SuSE Linux 9.2, Re33dHat Enterprise 3 Update 3.) Hardware Prefetcher To turn on/off the MLC streamer prefetcher. IB957 User’s Manual Aptio Setup Utility Boot Security Save & Exit Intel(R) Core(TM) i5 CPU Supported 2394 MHz 20652 Supported Enabled → ← Disabled ↑↓... -
Page 36: Intel Virtualization Technology
BIOS SETUP Adjacent Cache Line Prefetch To turn on/off prefetching of adjacent cache lines. Intel Virtualization Technology When enabled, a VMM can utilize the additional hardware capabilities provided by Vanderpool Technology. Power Technology Enable the power management features. SATA Configuration SATA Devices Configuration. - Page 37 Intel IGD SWSCI OpRegion Advanced Main Chipset Intel IGD SWSCI OpRegion Configuration DVMT/FIXED Memory IGD – Boot Type Active LVDS LVDS Channel Type LVDS Panel Color Depth LVDS LCD Panel Type DVMT/FIXED Memory Select DVMT/FIXED Mode Memory size used by Internal Graphics Device.
- Page 38 BIOS SETUP Intel TDT(AT-p) Configurations Advanced Main Chipset Intel Theft Deterrence Technology Configuration TDT Recovery Enable/Disable TDT in BIOS for testing only. TDT Recovery Set the number of times Recovery attempted will be allowed. IB957 User’s Manual Aptio Setup Utility...
-
Page 39: Usb Configuration
USB Configuration Advanced Main Chipset USB Configuration USB Devices: 2 Hubs Legacy USB Support EHCI Hand-off Device Reset Timeout Legacy USB Support Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. EHCI Hand-off Enabled/Disabled. -
Page 40: Super Io Configuration
BIOS SETUP Super IO Configuration Advanced Main Chipset Super IO Configuration Super IO Chip -> Serial Port 0 Configuration -> Serial Port 1 Configuration -> Serial Port 2 Configuration -> Serial Port 3 Configuration Parallel Port Configuration Power Failure ACPI Shutdown Temperature Serial Port Configuration Set Parameters of Serial Ports. - Page 41 H/W Monitor Advanced Main Chipset PC Health Status CPU Temperature System Temperature CPU FAN Speed VCC3V Vcore 1.5V VSB3V VBAT CPU Fan Smart Fan Control Temperatures/Voltages These fields are the parameters of the hardware monitoring function feature of the motherboard. The values are read-only values as monitored by the system and show the PC health status.
- Page 42 BIOS SETUP Thermal Configuration Advanced Main Chipset Thermal Configuration Intelligent Power Sharing Intelligent Power Sharing • Intelligent power sharing – The default setting is Enabled. • Mch Turbo – The default setting is Enabled. • IPS Policy – The default setting is Driver. •...
-
Page 43: Serial Port Console Redirection
AMT Configuration Advanced Main Chipset Unconfigure AMT/ME Options are Enabled and Disabled. Unconfigure AMT/ME Perform AMT/ME unconfigure without password operation. Serial Port Console Redirection Advanced Main Chipset COM0 (Disabled) Console Redirection Serial Port for Out-of-Band Management/ Windows Emergency Management Services (EMS) Console Redirection Out-of-Band Mgmt Port Data Bits... -
Page 44: North Bridge
BIOS SETUP Chipset Settings This section allows you to configure and improve your system and allows you to set up some system features according to your preference. Advanced Main Chipset Enable CSID ► North Bridge ► South Bridge ► ME Subsystem Enable CSID By default, this item is disabled. - Page 45 North Bridge This section allows you to configure the North Bridge Chipset. Chipset Main Advanced Memory Information CPU Type Total Memory Memory Slot0 Memory Slot1 Memory Slot2 Memory Slot3 CAS# Latency(tCL) RAS# Active Time(tRAS) Row Precharge Time(tRP) RAS# to CAS# Delay(tRCD) Row Refresh Cycle Timea(tRFC) Write to Read Delay(tWTR) Active to Active Delay(tRRD)
- Page 46 BIOS SETUP PCI Express Port Options are Disabled, Enabled and Auto. IGD Memory IGD Share Memory Size. Options are Disable, 32M, 64M and 128M. PAVP Mode Select PAVP Mode used by Internal Graphics Device. Options are Disabled and Enabled. PEG Force Gen1 PCI Express Port Force Gen1.
-
Page 47: Audio Configuration
SB Chipset Configuration This section allows you to configure the South Bridge Chipset. Chipset Main Advanced SB Chipset Configuration SMBus Controller GbE Controller Wake on LAN from S5 SLP_S4 Assertion Stretch Enable SLP_S4 Assertion Width Audio Configuration Azalia HD Audio Azalia Internal HDMI codec High Precision Event Timer Configuration High Precision Timer... - Page 48 BIOS SETUP PCI Express Ports Configuration Enable or Disable the PCI Express Ports in the Chipset. Chipset Main Advanced PCI Express Ports Configuration PCI Express Port 1 PCI Express Port 2 PCI Express Port 3 PCI Express Port 4 PCI Express Port 5 PCI Express Port 6 PCI Express Port 7 PCI Express Port 8...
- Page 49 Intel ME Subsystem This section allows you to configure the PCI settings. Chipset Main Advanced Intel ME Subsystem Configuration ME Version ME Subsystem End of Post Message Execute ME8x ME Version Launches (Enabled/Disabled) the boot option for legacy network devices.
-
Page 50: Boot Settings
BIOS SETUP Boot Settings This section allows you to configure the boot settings according to your preference. Main Advanced Chipset Boot Configuration Quiet Boot Fast Boot Setup Prompt Timeout Bootup NumLock State CSM16 Module Version GateA20 Active Option ROM Messages Interrupt 19 Canture Boot Option Priorities Boot Option #1... -
Page 51: Boot Option Priorities
Boot Option Priorities Sets the system boot order. Hard Drive BBS Priorities Set the order of the legacy devices in this group. Security Settings This section allows you to configure and improve your system and llows you to set up some system features according to your preference. Main Advanced Chipset... -
Page 52: Save Changes And Exit
BIOS SETUP Save & Exit Settings Main Advanced Chipset Save Changes and Exit Disacard Changes and Exit Save Changes and Reset Discard Changes and Reset Save Options Save Changes Discard Changes Restore Defaults Save as User Defaults Restore User Defaults Boot Override SATA: ATAPI iHDS116 SATA: Hitachi HDS721616PLA380... -
Page 53: Boot Override
BIOS SETUP Save as User Defaults Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Boot Override Pressing ENTER causes the system to enter the OS. Launch EFI Shell from filesystem device Attempts to Launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. -
Page 54: Event Logs
BIOS SETUP Event Logs This section allows you to configure the Smbios Event Log. according to your preference. Main Advanced Chipset ► Change Smbios Event Log Settings View Smbios Event Log View System Event Log Main Advanced Chipset Enabling/Disabling Options Smbios Event Log Erasing Settings Erase Event Log... -
Page 55: Drivers Installation
If you find the items missing, please contact the vendor where you made the purchase. The contents of this section include the following: Intel Chipset Software Installation Utility ... 52 VGA Drivers Installation ... 54 Realtek HD Audio Driver Installation ... 56 LAN Drivers Installation ... -
Page 56: Intel Chipset Software Installation Utility
Plug & Play INF support for Intel chipset components. Follow the instructions below to complete the installation. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM57 Chipset Drivers. 2. Click Intel(R) Chipset Software Installation Utility. - Page 57 DRIVERS INSTALLATION 4. Click Yes to accept the software license agreement and proceed with the installation process. 5. On the Readme File Information screen, click Next to continue the installation. 6. The Setup process is now complete. Click Finish to restart the computer and for changes to take effect.
-
Page 58: Vga Drivers Installation
Driver, the Microsoft .NET Framework 3.5 SPI should be first installed. To install the VGA drivers, follow the steps below. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM57 Chipset Drivers. 2. Click Intel(R) QM57 Chipset Family Graphics Driver. - Page 59 5. On the Readme File Information screen, click Next to continue the installation of the Intel® Graphics Media Accelerator Driver. 6. On Setup Progress screen, click Next to continue. 7. Setup complete. Click Finish to restart the computer and for changes to take effect.
-
Page 60: Realtek Hd Audio Driver Installation
Realtek HD Audio Driver Installation Follow the steps below to install the Realtek HD Audio Drivers. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM57 Chipset Drivers. 2. Click Realtek High Definition Audio Driver. -
Page 61: Lan Drivers Installation
DRIVERS INSTALLATION LAN Drivers Installation Follow the steps below to install the Intel LAN drivers. 1. Insert the CD that comes with the board. Click Intel and then Intel(R) QM57 Chipset Drivers. 2. Click Intel(R) PRO LAN Network Driver. 3. When the Welcome screen appears, click Next. On the next screen, click Yes to to agree with the license agreement. -
Page 62: Driver Installation
DRIVER INSTALLATION 4. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue. 5. The wizard is ready to begin installation. Click Install to begin the installation. IB957 User’s Manual... - Page 63 DRIVERS INSTALLATION 6. When InstallShield Wizard is complete, click Finish. IB957 User’s Manual...
-
Page 64: Intel® Management Engine Interface
Microsoft .NET Framework 3.5 SPI should be first installed. Follow the steps below to install the Intel Management Engine. 1. Insert the drivers disc that comes with the motherboard. Click Intel and then Intel(R) AMT 6.0 Drivers. IB957 User’s Manual... - Page 65 DRIVERS INSTALLATION 2. When the Welcome screen to the InstallShield Wizard for Intel® Management Engine Components, click Next. On the next screen, click Yes to to agree with the license agreement. 2. When the Setup Progress screen appears, click Next. Then, click Finish when the setup progress has been successfully installed.
- Page 66 DRIVER INSTALLATION IB957 User’s Manual...
-
Page 67: Appendix
Appendix A. I/O Port Address Map Each peripheral device in the system is assigned a set of I/O port addresses which also becomes the identity of the device. The following table lists the I/O port addresses used. Address 000h - 01Fh 020h - 03Fh 040h - 05Fh 060h - 06Fh... -
Page 68: Interrupt Request Lines (Irq)
APPENDIX B. Interrupt Request Lines (IRQ) Peripheral devices use interrupt request lines to notify CPU for the service required. The following table shows the IRQ used by the devices on board. Level IRQ0 IRQ1 IRQ2 IRQ3 IRQ4 IRQ5 IRQ6 IRQ7 IRQ8 IRQ9 IRQ10... -
Page 69: Watchdog Timer Configuration
C. Watchdog Timer Configuration The WDT is used to generate a variety of output signals after a user programmable count. The WDT is suitable for use in the prevention of system lock-up, such as when software becomes trapped in a deadlock. Under these sorts of circumstances, the timer will count to zero and the selected outputs will be driven. - Page 70 APPENDIX return 0; //--------------------------------------------------------------------------- void EnableWDT(int interval) unsigned char bBuf; bBuf = Get_F81865_Reg(0x2B); bBuf &= (~0x20); Set_F81865_Reg(0x2B, bBuf); Set_F81865_LD(0x07); Set_F81865_Reg(0x30, 0x01); bBuf = Get_F81865_Reg(0xF5); bBuf &= (~0x0F); bBuf |= 0x52; Set_F81865_Reg(0xF5, bBuf); Set_F81865_Reg(0xF6, interval); bBuf = Get_F81865_Reg(0xFA); bBuf |= 0x01; Set_F81865_Reg(0xFA, bBuf);...
- Page 71 //--------------------------------------------------------------------------- // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE. //--------------------------------------------------------------------------- #include "F81865.H" #include <dos.h>...
- Page 72 APPENDIX unsigned char Get_F81865_Reg(unsigned char REG) unsigned char Result; Unlock_F81865(); outportb(F81865_INDEX_PORT, REG); Result = inportb(F81865_DATA_PORT); Lock_F81865(); return Result; //--------------------------------------------------------------------------- //--------------------------------------------------------------------------- // THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY // KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE // IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR // PURPOSE.