Table of Contents
Advertisement
Quick Links
Advertisement
Chapters
Table of Contents
Related Manuals for IBASE Technology IB903F
Summary of Contents for IBASE Technology IB903F
- Page 1 IB903F Embedded G-Series ® 3.5” Disk Size SBC USER’S MANUAL Version 1.0...
- Page 2 Acknowledgments AMI is a registered trademark of American Megatrends Inc. PS/2 is a trademark of International Business Machines Corporation. AMD is a registered trademarks of AMD Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. Fintek is a registered trademark of Fintek Electronics Corporation.
-
Page 3: Table Of Contents
IB903F Specifications ............3 Board Dimensions ............... 4 Installations ............5 Installing the Memory ............6 Setting the Jumpers ............. 7 Connectors on IB903F ............11 BIOS Setup ............23 Drivers Installation ........41 VGA Drivers Installation ..........42 Realtek HD Audio Driver Installation ......46 LAN Drivers Installation........... - Page 4 This page is intentionally left blank. IB903F User’s Manual...
-
Page 5: Introduction
INTRODUCTION Introduction Product Description The IB903F is a 3.5-inch single board computer based on the AMD® Embedded G-series (SoC) APU. The Embedded G-series (SoC) APU -based board delivers an exceptionally high-definition visual experience and offers improved CPU performance over Embedded G-series (SoC) APU. -
Page 6: Checklist
INTRODUCTION Checklist Your IB903F package should include the items listed below. The IB903F SBC This User’s Manual 1 CD containing chipset drivers and flash memory utility IB903F User’s Manual... -
Page 7: Ib903F Specifications
3.5” Disk Size SBC AMD Embedded G-series SoC (CPU+GPU+NB), 28nm process Type/Speed technology Quad Core @ 2.0 GHz (TDP=25 W) [Default, IB903F-Q2G] Dual Core @ 1.6 GHz (TDP=15W) [Optioanl][IB903F-16] Dual Core @ 1.5 GHz (TDP=9W) [Optioanl][IB903F] Chipset FT3 BGA package (24.5mm x 24.5mm) -
Page 8: Board Dimensions
INTRODUCTION Board Dimensions IB903F User’s Manual... -
Page 9: Installations
INSTALLATIONS Installations This section provides information on how to use the jumpers and connectors on the IB903F in order to set up a workable system. The topics covered are: Installing the Memory ................6 Setting the Jumpers ................7 Connectors on IB903F ................. 11... -
Page 10: Installing The Memory
INSTALLATIONS Installing the Memory The IB903F board supports one DDR3 memory socket for a maximum total memory of 8GB DDR3 memory type. Installing and Removing Memory Modules To install the DDR3 modules, locate the memory slot on the board and perform the following steps: 1. -
Page 11: Setting The Jumpers
INSTALLATIONS Setting the Jumpers Jumpers are used on IB903F to select various settings and features according to your needs and applications. Contact your supplier if you have doubts about the best configuration for your needs. The following lists the connectors on IB903F and their respective functions. -
Page 12: Jumper Locations On Ib903F
INSTALLATIONS Jumper Locations on IB903F Jumpers on IB903F ................Page JBAT1: Clear CMOS Contents .............. 9 JP2: COM1 RS232 RI/+5V/+12V Power Setting ........9 JP3: LVDS Panel Power Selection ............10 IB903F User’s Manual... -
Page 13: Jbat1: Clear Cmos Contents
INSTALLATIONS JBAT1: Clear CMOS Contents JBAT1 Setting Function Pin 1-2 Normal Short/Closed Pin 2-3 Clear CMOS Short/Closed JP2: COM1 RS232 RI/+5V/+12V Power Setting Setting Function Pin 1-3 +12V Short/Closed Pin 3-4 Short/Closed Pin 3-5 Short/Closed IB903F User’s Manual... -
Page 14: Jp3: Lvds Panel Power Selection
INSTALLATIONS JP3: LVDS Panel Power Selection Setting Panel Voltage Pin 1-2 3.3V (default) Short/Closed Pin 2-3 Short/Closed IB903F User’s Manual... -
Page 15: Connectors On Ib903F
INSTALLATIONS Connectors on IB903F Connector Locations on IB903F ............12 CN3, CN4: Gigabit LAN (RTL8111G) ..........13 CN5: USB 1/2 Connector ..............13 CN6: VGA DVI-I Connector ............... 13 CN7: DB9 Connector ................13 CN1, CN2: SATA Connectors ............. 14 J9: LCD Backlight Connector .............. -
Page 16: Connector Locations On Ib903F
INSTALLATIONS Connector Locations on IB903F IB903F User’s Manual... -
Page 17: Cn3, Cn4: Gigabit Lan (Rtl8111G)
DTR, Data terminal ready RI, Ring indicator GND, ground Not Used COM1 is jumper-less for RS-232, RS-422 and RS-485 and is to be configured with BIOS Selection. Pin # Signal Name RS-232 R2-422 RS-485 DATA- DATA+ Ground Ground Ground IB903F User’s Manual... -
Page 18: Cn1, Cn2: Sata Connectors
INSTALLATIONS CN1, CN2: SATA Connectors J9: LCD Backlight Connector Pin # Signal Name Backlight Power Backlight Enable Brightness Control Ground J2: MCU Flash Connector (factory use only) IB903F User’s Manual... -
Page 19: J3: Board Input Power Connector
HDD_LED+ HDD_LED- Ground RESET J4 provides connectors for system indicators that provide light indication of the computer activities and switches to change the computer status. J4 is an 8-pin header that provides interfaces for the following functions. IB903F User’s Manual... - Page 20 Reset Switch: Pins 7 and 8 The reset switch allows the user to reset the system without turning the main power switch off and then on again. Orientation is not required when making a connection to this header. J5: DDR3 SO-DIMM Socket IB903F User’s Manual...
-
Page 21: J6, J7: Sata Hdd Power Connectors
INSTALLATIONS J6, J7: SATA HDD Power Connectors Pin # Signal Name Ground Ground +12V J8: Digital I/O Connector Signal Name Signal Name OUT3 OUT1 OUT2 OUT0 IB903F User’s Manual... -
Page 22: J10: Spi Flash Connector (Factory Use Only)
J11 also supports mSATA. However, when J11 is used for mSATA, then CN1 SATA port cannot be used. Only one of them can be used at one time to support SATA. J12: Mini PCIE Connector (Half Size) IB903F User’s Manual... -
Page 23: J13: Debug 80 Port Connector (Factory Use Only)
INSTALLATIONS J13: Debug 80 Port Connector (factory use only) J14, J15: LVDS Connectors Signal Name Pin # Pin # Signal Name LCD_PWR LCD_PWR LD3+ LD3- CLK+ CLK- LD2+ LD2- LD1+ LD1- LD0+ LD0- IB903F User’s Manual... -
Page 24: J16, J18: Usb3/4/5/6 Connector
J16, J18: USB3/4/5/6 Connector Signal Name Pin # Pin # Signal Name Ground Ground J17: Audio Connector (DF11 Connector) Signal Name Pin # Pin # Signal Name LINEOUT_R LINEOUT_L Ground JD_FRONT LINEIN_R LINEIN_L Ground JD_LINEIN MIC-R MIC_L Ground JD_MIC1 IB903F User’s Manual... -
Page 25: J19: Amplify Connector
Signal Name OUTL+ OUTL- OUTR- OUTR+ J20: COM3, COM4 Serial Port (DF11 Connector) Signal Name Pin # Pin # Signal Name DSR3 DCD3 RTS3 RXD3 CTS3 TXD3 DTR3 Ground DSR4 DCD4 RTS4 RXD4 CTS4 TXD4 DTR4 Ground IB903F User’s Manual... -
Page 26: J21: Com2/Rs232 Serial Port
Pin # Pin # Signal Name DCD, Data carrier detect RXD, Receive data TXD, Transmit data Data terminal ready GND, ground DSR, Data set ready RTS, Request to send CTS, Clear to send RI, Ring indicator Not Used IB903F User’s Manual... -
Page 27: Bios Setup
The topics covered in this chapter are as follows: BIOS Introduction ..................24 BIOS Setup ....................24 Advanced Settings ..................26 Chipset Settings ..................... 33 Boot Settings ....................37 Security Settings ................... 39 Save & Exit Settings ..................40 IB903F User’s Manual... -
Page 28: Bios Introduction
<PgUp> and <PgDn> keys to change entries, <F1> for help and <Esc> to quit. When you enter the Setup utility, the Main Menu screen will appear on the screen. The Main Menu allows you to select from various setup functions and exit choices. IB903F User’s Manual... -
Page 29: System Date
DRIVERS INSTALLATION Main Settings Aptio Setup Utility – Copyright © 2011 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information Choose the system default language → ← Select Screen Memory Information ↑↓ Select Item Enter: Select... -
Page 30: Advanced Settings
Value to be programmed into PCI Latency Timer Register. VGA Palette Snoop Enables or disables VGA Palette Registers Snooping. PERR# Generation Enables or disables PCI device to generate PERR#. SERR# Generation Enables or disables PCI device to generate SERR#. IB903F User’s Manual... -
Page 31: Pci Express Settings
Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Select ACPI sleep state the system will enter, when the SUSPEND button is pressed. Lock Legacy Resources Enabled or Disabled Lock of Legacy Resources. IB903F User’s Manual... -
Page 32: Cpu Configuration
PPC Adjustment Provide to adjust _PPC object. NX Mode Enable/disable No-execute page protection function. SVM Mode Enable/disable CPU Virtualization. CPB Mode Enable/disable CPB. C6 Mode Auto/disable CPB. Node 0 Information View memory information related to Node 0. IB903F User’s Manual... -
Page 33: Ide Configuration
→ ← Select Screen Power-On after Power failure Disable ↑↓ Select Item Schedule Slot 1 None Enter: Select Schedule Slot 2 None Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit IB903F User’s Manual... -
Page 34: Usb Configuration
XHCI ownership change should be claimed by XHCI driver. EHCI Hand-off Enabled/Disabled. This is a workaround for OSes without EHCI hand-off support. The EHCI ownership change should be claimed by EHCI driver. USB Transfer time-out The time-out value for Control, Bulk, and Interrupt transfers. IB903F User’s Manual... -
Page 35: Serial Port Configuration
F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit Serial Port Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal settings for the Super IO Device. IB903F User’s Manual... -
Page 36: Smart Fan Function
PC health status. Smart Fan Function This field enables or disables the smart fan feature. At a certain temperature, the fan starts turning. Once the temperature drops to a certain level, it stops turning again. IB903F User’s Manual... -
Page 37: Chipset Settings
Trinity PI 1.0.0.3 Options for SATA Configuration → ← Select Screen SB SATA Configuration ► ► SB USB Configuration ↑↓ Select Item Enter: Select Change Field F1: General Help F2: Previous Values F3: Optimized Default F4: Save ESC: Exit IB903F User’s Manual... - Page 38 OnChip SATA Channel Enabled or Disabled. OnChip SATA Type Native IDE /n RAID /n AHCI /n AHCI /n Legacy IDE /n IDE->AHCI /n HyperFlash OnChip IDE mode Legacy mode or Native mode SATA IDE Combined Mode Enabled or Disabled. IB903F User’s Manual...
- Page 39 → ← Select Screen ► GFX Configuration Memory Iniformation ↑↓ Select Item Enter: Select Change Field Total memory: 8176 MB (DDR3) F1: General Help ► Socket 0 Information F2: Previous Values F3: Optimized Default F4: Save ESC: Exit IB903F User’s Manual...
-
Page 40: Integrated Graphics
Select Screen Starting Address: 0KB Ending Address: 8388607 KB ↑↓ Select Item Enter: Select Change Field Dimm0: Not Present F1: General Help Dimm1: size=8192 MB, speed=667 MHz F2: Previous Values F3: Optimized Default F4: Save ESC: Exit IB903F User’s Manual... -
Page 41: Boot Settings
UPON REQUEST – GA20 can be disabled using BIOS services. ALWAYS – do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Option ROM Messages Set display mode for Option ROM. Options are Force BIOS and Keep Current. IB903F User’s Manual... -
Page 42: Int19 Trap Response
Controls the execution of UEFI and Legacy Storage OpROM. Launch Video OpROM policy Controls the execution of UEFI and Legacy Video OpROM. Other PCI device ROM priority For PCI devices other than Network, Mass storage or Video defines which OpROM to launch. IB903F User’s Manual... -
Page 43: Security Settings
Secure Boot flow control. Secure Boot is possible only if System runs in User Mode. Secure Boot Policy Select Secure Boot mode extended options: Internal FV, Option ROM, Removable Media, Fixed Media. Administrator Password Set Setup Administrator Password. IB903F User’s Manual... -
Page 44: Save & Exit Settings
Save the changes done so far as User Defaults. Restore User Defaults Restore the User Defaults to all the setup options. Launch EFI Shell from filesystem device Attempts to launch EFI Shell application (Shellx64.efi) from one of the available filesystem devices. IB903F User’s Manual... -
Page 45: Drivers Installation
VGA Drivers Installation ..............42 Realtek HD Audio Driver Installation ..........46 LAN Drivers Installation ..............47 IMPORTANT NOTE: After installing your Windows operating system, you must install first the Intel Chipset Software Installation Utility before proceeding with the drivers installation. IB903F User’s Manual... -
Page 46: Vga Drivers Installation
DRIVERS INSTALLATION VGA Drivers Installation 1. Insert the drivers DVD that comes with the board. Click AMD, then AMD eKabini Chipset Drivers. 2. Click AMD eKabini Series Graphics Drivers. IB903F User’s Manual... - Page 47 DRIVERS INSTALLATION 3. When the welcome screen appears, click Next. 4. Select the language you would like to be displayed and click Next. IB903F User’s Manual...
- Page 48 DRIVERS INSTALLATION 5. Click Next to continue the installation process. 6. Select Express and the installation location and click Next. IB903F User’s Manual...
- Page 49 DRIVERS INSTALLATION 7. Click Accept to accept the End User License Agreement. 8. To reboot the system, click Yes. IB903F User’s Manual...
-
Page 50: Realtek Hd Audio Driver Installation
Realtek HD Audio Driver Installation 1. Click Realtek High Definition Audio Driver. 2. On the Welcome to the InstallShield Wizard screen, click Next to proceed with and complete the installation process. 3. Restart the computer when prompted. IB903F User’s Manual... -
Page 51: Lan Drivers Installation
5. Click the checkbox for Drivers in the Setup Options screen to select it and click Next to continue. 6. When the Ready to Install the Program screen appears, click Install to continue. 7. When InstallShield Wizard is complete, click Finish. IB903F User’s Manual... -
Page 52: Appendix
Motherboard resources 00A2h-00BFh Direct memory access controller 00B1h-00B1h Motherboard resources 00F0h-00FFh Numeric data processor 0170h-0177h ATA Channel 1 01F0h-01F7h ATA Channel 0 02E8H-02EFh Communications Port (COM4) 02F8H-02FFh Communications Port (COM2) 03E8H-03EFh Communications Port (COM3) 03F8H-03FFh Communications Port (COM1) IB903F User’s Manual... -
Page 53: Interrupt Request Lines (Irq)
IRQ 18 Standard Open HCD USB Host Controller IRQ 18 Standard Open HCD USB Host Controller IRQ 18 Standard Open HCD USB Host Controller IRQ 19 PCI standard PCI-to-PCI bridge IRQ 19 AMD SATA Controller (IDE Mode) IB903F User’s Manual... -
Page 54: Watchdog Timer Configuration
Fintek 81866, program abort.\n"); return(1); }//if (SIO == 0) if (argc != 2) printf(" Parameter incorrect!!\n"); return (1); bTime = strtol (argv[1], endptr, 10); printf("System will reset after %d seconds\n", bTime); if (bTime) EnableWDT(bTime); } else DisableWDT(); return 0; IB903F User’s Manual... - Page 55 //--------------------------------------------------------------------------- void DisableWDT(void) unsigned char bBuf; Set_F81846_LD(0x07); //switch to logic device 7 bBuf = Get_F81846_Reg(0xFA); bBuf &= ~0x01; Set_F81846_Reg(0xFA, bBuf); //disable WDTO output bBuf = Get_F81846_Reg(0xF5); bBuf &= ~0x20; bBuf |= 0x40; Set_F81846_Reg(0xF5, bBuf); //disable WDT //--------------------------------------------------------------------------- IB903F User’s Manual...
- Page 56 F81846_UNLOCK); outportb(F81846_INDEX_PORT, F81846_UNLOCK); //--------------------------------------------------------------------------- void Lock_F81846 (void) outportb(F81846_INDEX_PORT, F81846_LOCK); //--------------------------------------------------------------------------- void Set_F81846_LD( unsigned char LD) Unlock_F81846(); outportb(F81846_INDEX_PORT, F81846_REG_LD); outportb(F81846_DATA_PORT, LD); Lock_F81846(); //--------------------------------------------------------------------------- void Set_F81846_Reg( unsigned char REG, unsigned char DATA) Unlock_F81846(); outportb(F81846_INDEX_PORT, REG); outportb(F81846_DATA_PORT, DATA); Lock_F81846(); //--------------------------------------------------------------------------- IB903F User’s Manual...
- Page 57 (F81846_BASE) #define F81846_DATA_PORT (F81846_BASE+1) //--------------------------------------------------------------------------- #define F81846_REG_LD 0x07 //--------------------------------------------------------------------------- #define F81846_UNLOCK 0x87 #define F81846_LOCK 0xAA //--------------------------------------------------------------------------- unsigned int Init_F81846(void); void Set_F81846_LD( unsigned char); void Set_F81846_Reg( unsigned char, unsigned char); unsigned char Get_F81846_Reg( unsigned char); //--------------------------------------------------------------------------- #endif //__F81846_H IB903F User’s Manual...
- Page 58 APPENDIX This page is intentionally left blank. IB903F User’s Manual...