Pci Latency Timer - IBASE Technology ARRANDALE IB957 User Manual

PCI Subsystem Settings
This section allows you to configure the PCI, PCI-X and PCI Express
settings.
Advanced
Main
PCI Bus Driver Version
PCI ROM Priority
PCI Common Settings

PCI Latency Timer

PCI Express Device Settings
Extended Tag
No Snoop
Maximum Payload
Maximum Read Request
PCI Express Link Settings
ASPM Support
WARNING: Enabling ASPM may cause
Some PCI-E devices to fail
PCI ROM Priority
In case of multiple Option ROMs (Legacy and EFI Compatible), specifies what
PCI Option ROM to launch.
PCI Latency Timer
Value to be programmed into PCI Latency Timer Register.
Extended Tag
If ENABLED allows Device to use 8-bit Tag field as a requester.
No Snoop
Enables or Disables PCI Express Device No Snoop option.
Maximum Payload
Set Maximum Payload of PCI Express Device or allow System BIOS to select
the value.
Maximum Read Request
Launches (Enabled/Disabled) the boot option for legacy network devices.
Aptio Setup Utility
Chipset Boot
V 2.02.01
EFI Compatible ROM
32 PCI Bus Clocks
Disabled
Enabled
Auto
Auto
Disabled
IB957 User's Manual
Security Save & Exit
→ ←
Select Screen
↑↓ Select Item
Enter: Select
+- Change Field
F1: General Help
F2: Previous Values
F3: Optimized Default
F4: Save
BIOS SETUP
Event Logs
ESC: Exit
27