Setting The Jumpers - IBASE Technology ARRANDALE IB957 User Manual

INSTALLATIONS

Setting the Jumpers

Jumpers are used on IB957 to select various settings and features
according to your needs and applications. Contact your supplier if you
have doubts about the best configuration for your needs. The following
lists the connectors on IB957 and their respective functions.
Jumper Locations on IB957 ................................................................... 9
JP2: LCD Panel Power Selection ......................................................... 10
JP3, JP4, JP5: RS232/422/485 (COM2) Selection .............................. 10
JBAT1: Clear CMOS Setting............................................................... 11
IMPORTANT NOTE: When the system boots without the CRT being
connected, there will be no image on screen when you insert the
CRT/VGA cable. To show the image on screen, the hotkey must be
pressed.
8 IB957 User's Manual