Panasonic AJ-D910WB Operating Instructions Manual page 75

CONTENTS
Adjusting the White Balance/Black Balance
When the ON setting has been selected for FILTER INH
When the automatic white balance is adjusted, the colour temperature and filter number at the
time are displayed.
When the filter is now turned, the new colour temperature and filter number are displayed.
The white balance is almost perfectly adjusted if the subject is illuminated by a ligth with a colour
temperature close to the one displayed.
(Display example)
AWB A O K 3 . 2 K
5 . 2 K ( B )
If the colour temperature of the subject in this state is close to 5.2K, the white balance is adjusted,
and so operation is now possible.
3 . 2 K ( B )
– 75 (E) –
Use filter (B) to adjust the AWB for objects with an illumination
colour temperature of 3200K.
Change to filter (C).
"5.2K (B)" (see Note) appears on the display.
Note:
This display indicates that the AWB was adjusted using filter (B).
Return to filter (B).
"3.2K (B)" appears on the display denoting the status when the
AWB was first adjusted.