Panasonic AJ-D910WB Operating Instructions Manual page 132

CONTENTS
MAIN Menu Screen 3 of 4 (SUB menus)
CARD READ/WRITE screen
The operations for loading the menu data from the setup card, saving it on the setup card, and configuring the setup card are set
on this screen.
Align the arrow (>) with the item and press the UP or DOWN button to initiate the corresponding operation.
¢|
C A R D R E A D / WR I T E
R E A D
S E L E C T 1
WR I T E
S E L E C T 1
C A R D CON F I G
R E A D U S E R D A T A
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
{
Item
READ
SELECT
WRITE
SELECT
CARD CONFIG
READ USER
DATA
– 132 (E) –
Variable VF
range display
ENG This loads (reads) the data from the
——
setup card.
1 ENG This item is always set to "1". [It
(fixed) cannot be used when the Picture Link
adaptor board (AJ-YAP900, optional
accessory) has not been installed.]
ENG This saves (writes) the camera's data
——
onto the setup card.
1 ENG This item is always set to "1". [It
(fixed) cannot be used when the Picture Link
adaptor board (AJ-YAP900, optional
accessory) has not been installed.]
—— ENG This formats the setup card.
ENG This loads (reads) the user area data
——
in the camera's memory.
Remarks