Panasonic AJ-D910WB Operating Instructions Manual page 149

CONTENTS
REMOTE menu screen
!LED (REMOTE) screen
The display of the various !LED information items appearing inside the viewfinder in the remote control mode is set ON or OFF
on this screen.
>O ! L E D
( R EMO T E )
N
G A I N ( 0 d B ) :
O F F
G A I N ( 3 d B ) : O F F
s
:
S H U T T E R O F F
:
WH I T E P R E S E T O F F
:
E X T E N D E R O F F
:
F I L T E R O F F
:
S U P E R V O F F
:
2 5 M / 5 M 0 O F F
ÁIf both GAIN (0 dB) and GAIN
(p3 dB) have been set to ON at
the same time, !LED will light on
condition that settings other than
0 dB and -3 dB have been respec-
tively selected for the two GAIN
items.
|Note{
This screen is valid only in the re-
mote control mode. When it is valid,
what has been set on the !LED
screen has no effect.
TALLY/RET (REMOTE) screen
The setting for the lighting of the tally lamp during recording and return switch setting are selected on this screen.
>O
( R EMO T E )
T A L L Y / R E T
:
R E C T A L L Y GR E E N
:
R E T SW C AM R E T
|Note{
This screen is valid only in the re-
mote control mode. When it is valid,
what has been set on the MAIN
FUNCTION screen has no effect.
The underlining in the variable range column indicates the setting in the preset mode.
USER menu: The USER menu appears when the MENU switch is set to SET.
ENG menu: The ENG menu appears when the MENU switch is set to SET while the SHIFT/ITEM button and UP button are
held down together.
Item
GAIN (0 dB)
GAIN (p3 dB)
SHUTTER
WHITE PRESET
EXTENDER
FILTER
SUPER V
25M/50M
N
Item
REC TALLY
RET SW
– 149 (E) –
Variable
VF
range
display
ON ENG ON: This display lights when a setting other
OFF than 0 dB has been selected for the gain.
OFF: The display does not light.
ON ENG ON: This display lights when a setting other
than p3 dB has been selected for the
OFF
gain.
OFF: The display does not light.
ON ENG ON: This display lights when the shutter (except
OFF with SUPER V) is ON.
OFF: The display does not light.
ON ENG ON: This display lights when the AWB has been
OFF set to PRST (PRESET).
OFF: The display does not light.
ON ENG ON: This display lights when the
OFF extender is used for the lens.
OFF: The display does not light.
ON ENG ON: This display lights when a setting other
OFF than 3200K has been selected for the filter.
OFF: The display does not light.
ON ENG ON: This display lights when SUPER V is ON.
OFF OFF: The display does not light.
25M ENG 25M: This display lights when the REC MODE
50M has been set to 50M.
OFF 50M: This display lights when the REC MODE
has been set to 25M.
OFF: The display does not light.
Variable
VF
range
display
RED ENG For selecting the method used to
GREEN advise the user that recording is
CHARA underway.
RED:
GREEN: The green tally lamp lights.
CHARA: The character lamp lights.
CAM RET ENG For selecting the return switch
REC function.
CHECK CAM RET:
REC CHECK: The REC CHECK
Remarks
Remarks
The red tally lamp lights.
The return signal output
operation is performed.
operation is performed.