Panasonic AJ-D910WB Operating Instructions Manual page 20

CONTENTS
Controls and Their Functions
¿ ¡ Ω
ø
æ
¬
...
¼ MARK button
This is used when the Picture Link (Pix Link)F
(MARK1), M2 (MARK2) or no display appears in the viewfinder.
F
1 Picture Link adaptor board (AJ-YAP900) is sold as an option.
½ EJECT (cassette eject) button
Press this to insert or eject the cassette.
¾ REW (rewind) button
Press this to rewind the tape. Its lamp lights during rewinding.
If this button is pressed during playback, the playback images are rewound at approximately
quadruple speed while the button is held down.
¿ FF (fast forward) button
Press this to fast forward the tape. Its lamp lights during fast forwarding.
If this button is pressed during playback, the playback images are fast forwarded at approxi-
mately quadruple speed while the button is held down.
À PLAY/PAUSE button
Press this to view the playback images on the viewfinder screen or colour video monitor. Its
lamp lights during playback.
If this button is pressed again during playback, playback is paused and the lamp goes off. After
playback has been paused for 2 minutes, the unit automatically switches to stop status
(STOP).
Á STOP button
Press this to stop the tape travel.
 EMERGENCY screw (inside the rubber cap)
For details, refer to the "emergency eject" function (on page 152).
– 20 (E) –
1 function is to be used. Each time it is pressed M1