Battery Pack Removal And Replacement - Avaya 3600 Series User Manual

6.2 Battery Pack Removal and Replacement

To remove and replace the 3616 and 3620 battery pack:
To remove: Press down on the latch on the battery pack on the back of the phone. The battery pack releases
·
outward.
To replace: Slide the lip of the battery pack into the bottom of the cavity and push the top of the battery pack until
·
is snaps into place. You should not have to force it against the phone.
To remove and replace the 3626 battery pack:
To remove: Hold the phone in one hand with the keypad facing up and press both battery pack release buttons (on
·
the left and right side of the phone) at the same time. The battery pack releases downward and you can catch it with
the palm of your hand.
If the battery pack does not release, gently shake the handset while pressing both release buttons. Do not pry.
To replace: Slide the battery pack straight into the cavity until it snaps into place. You should not have to force it
·
against the phone.
Note
If you are using the telephony gateway on your phone system, the battery pack can be changed while the call is still
·
in progress.
To change the battery pack while on a call:
1. Quickly remove the discharged battery pack but do not press End Call on your phone.
2. Replace with a charged battery pack and then press Power On to turn the phone back on.
3. To resume the call in progress, press Start.
Note
Battery packs are not interchangeable. The 3626 phone uses the BPX100 battery pack. The 3616 phone uses the
·
BPE100 battery pack (Black) and the 3620 phone uses the BPN100 battery pack (Blue).
3600 Phones
IP Office
Battery Packs: Low Battery Indication
15-601104 Issue 02b (08 September 2008)
Page 35