Ring Options - Avaya 3600 Series User Manual

5.3 Ring Options

The ring options allows you to set the ring for three separate functions; Telephone Ring and Auxiliary Rings 1 and 2.
Telephone Ring
The telephone ring option enables you to set a distinctive ring style, volume and sequence. You can select from audible
ring, vibrate-only ring or vibrate ring along with/or followed by an audible ring.
Ring Cadence
The cadence is the rhythm of the ring. It can be set to a pre-programmed ring or set to a obtain its cadence from the
PBX. The PBX option is designed to utilize any distinctive rings sent by the PBX while allowing you to set unique rings for
auxiliary applications.
Off: Silent
·
PBX: Determines the ring cadence. For example, the PBX may send rings to differentiate between internal and
·
external calls.
Continuous: Rings continually until answered.
·
Short Pulse: Rings in short bursts.
·
Long Pulse: Rings in long bursts.
·
Ring Tone
Play enables you to preview the Ring Tone before selecting. If Ring Cadence is turned off, the Ring Tone option will not
appear on the menu. You can select from five available tones.
Ring Volume
The graduated volume bar indicates the volume levels. You can override this setting by adjusting the volume whilst the
handset is ringing:
To select a volume level, press Up or Down (on the left side of your phone) and then press OK.
·
Note
If Ring Cadence is turned off, the Ring Volume option is not displayed.
·
Vibrate Cadence
The Vibrate Cadence options are exactly the same as the Ring Cadence options.
Ring Delay
The Ring Delay option determines how long the Vibrate Cadence will play for before the audible ring starts. If the Ring
Cadence or Vibrate Cadence is turned off, the Ring Delay option will not appear on the menu.
Select the desired length of Ring Delay:
No Delay: The audible ring starts as soon as the phone starts to vibrate.
·
5 Second Delay: The phone vibrates for five seconds before the audible ring starts.
·
10 Second Delay: The phone vibrates to ten seconds before the audible ring starts.
·
Auxiliary Ring 1 and 2
The Auxiliary Ring 1 and 2 options are designed to be utilized by OAI applications, enabling you to set a distinctive ring
for these applications. Select the desired Auxiliary Ring.
3600 Phones
IP Office
User Preferences: Lock Keys
15-601104 Issue 02b (08 September 2008)
Page 27