Phone Options - Avaya 3600 Series User Manual

5.4 Phone Options

The phone options allow you to set the phone for five separate functions; Noise Mode, Key and Warning Tones,
Display Contrast and Keypad Autolock.
Noise Mode
The Noise Mode option enables you to adjust your phone to account for the noise level in your environment. Select from:
Normal: For most office environments.
·
High: For moderate background noise.
·
Severe: For extremely noisy conditions.
·
Note
Unless you are in a loud environment, using High and Severe Noise Modes is not recommended as you may find it
·
difficult to be heard on your phone.
Key Tones
When you press the keypad, Key Tones are played. Key Tones are enabled by default and can be disabled, if required.
Warning Tones
Warning tones are played to alert you to various conditions, such as out of range, system up or down etc. Warning Tones
are enabled by default and can be disabled, if required.
Display Contrast
You can adjust the display for different lighting conditions.
To set the contrast , press Up or Down (on the left side of your phone) until the desired contrast is displayed and then
press OK. The minimum value is 30 and the maximum value is 83.
Keypad Autolock
When the phone is in standby mode, you can set the keypad to lock automatically. The Keypad Autolock is disabled by
default. You can select a delay before locking:
Disable: The keypad will not lock.
·
5 Seconds: The keypad will lock in five seconds.
·
10 Seconds: The keypad will lock in ten seconds.
·
20 Seconds: The keypad will lock in twenty seconds.
·
3600 Phones
IP Office 15-601104 Issue 02b (08 September 2008)
Page 28