Turning The Phone On/Off; Answering Calls - Avaya 3600 Series User Manual

3. Basic Operation

3.1 Turning the Phone On/Off

To turn the phone on:
Press and hold
·
The in-service tone sounds and the extension number is displayed. The phone is now in standby mode, ready to
make and receive calls.
To turn the phone off:
While in standby mode, press and hold
·
The phone cannot be directly turned off during a call, you must end the call first and then turn the phone off.

3.2 Answering Calls

Your phone will ring or vibrate to alert you to an incoming call. Additionally, a line number on the display may flash. The
display may also show information about the call, such as the caller's name and extension.
To answer a call:
1. Press Start Call and hold the earpiece to your ear and speak.
2. When the call is finished, press
To answer a call via the headset:
1. With the headset plugged in to the phone, press either
2. When the call is finished, press
Notes
It is not necessary to unlock your phone to answer a call.
·
If you are on a call and hear subdued ringing, a call is on the second line. The line number on the display may be
·
flashing.
To answer an incoming call whilst on a call:
1. Put your first call on hold by pressing the Hold softkey.
2. Press LINE and then press the line number of the second call.
3. When the call is finished, press
3600 Phones
IP Office
Power On/Start Call until two chirps sound (about one second).
Power Off/End Call until one chirp sounds. The phone turns off.
End Call.
End Call.
End Call.
Start Call, 0-9, * or #.
15-601104 Issue 02b (08 September 2008)
Page 16