Other Sensors - Oki OKIPAGE 8c Plus Maintenance Manual

2.5.2

Other sensors

1 Form end sensor
This sensor checks whether the paper cassette is empty.
2 FF form end sensor
This sensor checks whether the front feeder has paper.
3 FF home switch
This microswitch checks whether the front feeder stage is in the up or down position.
4
EP up/down sensor (one for each color Y, M, C, K)
This sensor checks whether the I/D unit is in the up or down position.
5
Waste toner sensor
This sensor judges whether the waste toner cartridge is full by measuring a time period at
which the sensor lever turns on periodically. When the time period falls under a preset
value, the system judges that the waste toner cartridge is full and displays the "waste
toner full" message.
6
Resist up/down sensor
This sensor detects the up or down position of the resist roller 2.
7 Temperature sensor
Refer to 2.8 (Transfer Control according to Environmental Changes).
8 Humidity sensor
Refer to 2.8 (Transfer Control according to Environmental Changes).
41057601TH Rev.1
35/