Oki OKIPAGE 8c Plus Maintenance Manual page 128

8
Cannot Receive Data from HSP Interface.
• Is HSP I/F board connected correctly to the main board (PCE PCB)?
No Connect the HSP I/F board correctly to the main board (PCE PCB).
• Yes Is there Any bent or broken pin on the HSP I/F board?
Yes Replace the HSP I/F board.
• No Replace the main board.
• Repaired?
Yes End
• No The HSP I/F board may be not defective. Check the settings of the host computer or
the connection of the interface cables and the others.
41057601TH Rev.1
128/