Feed Roller - Oki OKIPAGE 8c Plus Maintenance Manual

3.3.4

Feed roller

(1) Remove the Cover Upper (see 3.3.1 step1).
(2) Remove the roller holder assy (see 3.3.1 step2).
(3) Remove the AOLT-PCB (see 3.3.2).
(4) Remove the hopping motor assy (see 3.3.3).
Remove the latch on the feed roller gear 1 and remove the feed roller gear 1.
(5)
(6) Remove the latch on the feed roller bearing 2 and remove the feed roller bearing 2.
Shift the feed roller 3 to the right side and lift it out, holding it on the left side.
(7)
2
41057601TH DRAFT Version
3
1
189/