3.3.39 PXC PCB
1.
Remove the contact (BL-R) assy and contact (CL-R) assy. (See 3.3.36)
2.
Remove the contact (BL-L) assy and contact (CL-L) assy. (See 3.3.37)
3.
Remove the hopping motor. (See 3.3.19)
4.
Remove the motor assy BT. (See 3.3.15)
5.
Remove the gear heat assy. (See 3.3.12)
6.
Remove the roller assy hopping. (See 3.3.25)
7.
Remove the holder gear toner assy. (See 3.3.30)
8.
Remove the high voltage power supply unit. (See 3.3.33)
9.
Unplug the inlet AC. (See 3.3.16)
10. Unscrew 9 screws 1 then remove the guide cassettes (L) 2 and (R) 3 together.
11. Unscrew the screw 4 then remove the switch 5.
12. Unscrew the screw 6 then remove the PXC PCB 7.
1
1
41057601TH Rev.1
1
1
1
7
6
4
5
Figure 3.3.39 PXC PCB
1
2
3
86/