Step 3 Install Expansion Card - SOYO SY-KT600 DRAGON Plus User Manual

Hardware Installation

Step 3 Install Expansion Card

The motherboard has 1 AGP slot and 5 PCI slots.
1. Read the related expansion card's instruction document before inserting
the expansion card into the computer.
2. Press the expansion card firmly into expansion slot in motherboard.
3. Be sure the metal contacts on the card are indeed seated in the slot.
4. Replace the screw to secure the slot bracket of the expansion card.
5. Install driver for the operating system you use.
Note: AGP cards working on 3.3V are not supported. Only AGP cards
working on 1.5V can be used in this M/B. For AGP card voltage
specification, please check the AGP card manual or contact your AGP
card's manufacturer.
SY-KT600 DRAGON Plus
23