SOYO SY-KT600 DRAGON Plus User Manual page 77

BIOS Setup Utility
Power Management Controls (Continue)
Setting
Soft-Off by Instant-off
PWR-BTTN Delay 4 Sec. Turns off the system power 4
Run Auto
VGABIOS if
Yes
S3 Resume
No
AC Loss On
Auto Restart
Off
Auto
Press Enter Select items that will wake up your
IRQ/Event
Activity
Detect
IRQ/Event Activity Detect
Setting
PS2KB Hot key
Wakeup Select Password
Disabled
PS2KB
Wakeup from
Ctrl+F1~F12
S1-S5
Power
Wake
Any Key
Description
seconds after pushing the power
button.
Some OS (win xp/2k) requires to
load VGA BIOS after resume from
S3.
The system will switch on when
power comes back after a power
failure.
The system will remain off when
power comes back after a power
failure.
The system will return to the state it
was in before the power failure when
power returns. (i.e: If the system was
on, it will switch on again, if it was
off, it will remain off)
system when in one of sleep modes.
Press enter to go the select item page.
Description
You can boot-up your system by
PS/2 K/B VIA hotkey or
password.
You can set the following hotkey :
1. Disable
2. Choose CTRL+F1 up to F12
3. The power key in the K/B. (if
available)
4. The wake-up key in the K/B. (if
available)
5. Any key in the K/B.
74
SY-KT600 DRAGON Plus
Note
Default
Default
Default
Note
Default
Default