SOYO SY-KT600 DRAGON Plus User Manual page 13

Motherboard Description
Bus Mastering EIDE/ATAPI Ports
These connectors is to attach your IDE devices to. These
L
connectors can support up to 4 IDE devices, 1 master and 1 slave
per connector. Please check the A. IDE Device Installation
(HDD, CD-ROM) paragraph on page 24 for more details.
Serial ATA Harddisk connectors (SATA1, SATA2)
These connectors are to attach your UDMA150 SATA harddisks
M
to. For more details, please check the A. IDE Device Installation
(HDD, CD-ROM) paragraph on page 24.
VIA VT8237 South Bridge
Featuring the first ever integrated combined Serial ATA/RAID
controller, the VT8237 is the most advanced South Bridge
available on the market today. With its integrated dual channel
native Serial ATA/RAID controller supplying 150MB/s of
bandwidth per port and support for RAID 0, RAID 1, and RAID
0+1, the VT8237 delivers the highest disk data transfer rates for
N
maximum system performance and provides the most advanced
fault tolerant solution for optimum data integrity. The VT8237 also
features support for up to four Parallel ATA-133 devices, extending
flexibility to the system integrator by allowing for mainstream or
value configurations leveraging the existing technology standard.
Additional features on the VIA VT8237 South Bridge include
support for up to eight USB 2.0 ports, and integrated PCI support.
Floppy disk connector
This motherboard supports one floppydrive. For more details,
O
please check the B. Floppy Drive Installation paragraph on page
25.
Onboard buzzer
P
This buzzer gives off system beeps.
5V Stand-By Indicator LED
The power supply will always supply a 5V standby voltage to your
Q
motherboard so that it can power on via for example Wake On Lan
technology. This LED shows that your power supply is supplying
this standby voltage to your motherboard.
RJ2 Dipswitch
R
This dipswitch is to set the multiplier of an unlocked CPU. Please
check the RJ2 Dipswitch paragraph on page 21 for more details.
SY-KT600 DRAGON Plus
10