SOYO SY-KT600 DRAGON Plus User Manual page 36

Hardware Installation SY-KT600 DRAGON Plus
2. Cooling Fan Installation
(1) CPU Cooling FAN (CPUFAN1, CPUFAN2)
After you have seated the CPU properly on the processor, attach the 3-pin
fan cable to the CPUFAN1 connector on the motherboard.
To avoid any damage to the system, install according to the following pin
assignment:
CPU Cooling Fan
(CPUFAN1,CPUFAN2)
CPUFAN Pin Assignment
CPUFAN1
1 2 3
GND 12V SENSOR
CPUFAN2
1 2 3
GND 12V NC
33