Hardware Installation
Repeat this operation until you get the following screen.
4. The BIOS Setup screen appears:
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Esc : Quit
F10 : Save & Exit Setup
2-3 QUICK BIOS SETUP
After the hardware installation is completed, turn the power switch
on, then press the <DEL> key during the system diagnostic checks to
enter the Award BIOS Setup program. The CMOS SETUP UTILITY
will be shown on the screen. Follow these steps to configure the CPU
settings.
Phoenix – Award BIOS CMOS Setup Utility
Change CPU's Clock & Voltage
SY-KT600 DRAGON Plus
Load Fail - Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
: Select Item
41