Table of Contents
Advertisement
Hardware Installation
Memory Configuration Table
Number of Memory
Modules
RAM Type
Memory Module Size (MB)
Step 3 Install Expansion Card
The motherboard has 1 AGP slot and 6 PCI slot.
1.
Read the related expansion card's instruction document before inserting
the expansion card into the computer.
2.
Press the expansion card firmly into expansion slot in motherboard.
3.
Be sure the metal contacts on the card are indeed seated in the slot.
4.
Replace the screw to secure the slot bracket of the expansion card.
5.
Install related driver from the operating system.
AGP Slot
This motherboard supports AGP 2x/4x/Pro VGA CARD.
DO NOT remove the safety tab underneath it if you will be using an AGP
card without a retention notch. Removing may cause the card to shift and
may cause damage to your card, slot, and motherboard. Remove ONLY
when you will be using an AGP Pro card. You can use a pen tip to remove
the tab from the bay.
Note: This Motherboard can only support 1.5V VGA Card.
SY-P4I Fire DRAGON
DIMM 1
DDR SDRAM
64/128/256/512 MB/1 GB
17
DIMM 2
Advertisement
Table of Contents
