SOYO SY-KT600 DRAGON Plus User Manual page 59

Amd athlon & duron processors supported via kt600 agp/pci motherboard 100/133/166/200 mhz front side bus supported atx form factor
Hide thumbs Also See for SY-KT600 DRAGON Plus:
Table of Contents

Advertisement

BIOS Setup Utility
CHIPSET FEATURES SETUP (Continue)
Video RAM
Cacheable
Auto Detect
DIMM/PCI Clk Enabled
Spread
Spectrum
Current FSB
Frequency
CPU Frequency
Mode
Frequency
1MHz Stepping
Setting
Description
Disabled
When synchronous DRAM is installed,
the number of clock cycles of CAS
Enabled
latency depends on the DRAM timing.
Do not reset this field from the default
value specified by the system designer
Disabled
When enabled, this item will auto
detect if the DIMM and PCI socket
have devices and will send clock signal
to DIMM and PCI devices. When
disabled, it will send the clock signal to
all DIMM and PCI socket.
Disabled
This item allows you to Disabled /
Enabled the spread spectrum
Enabled
modulates.
Show the current speed of CPU Front
Side Bus.
100 MHz
Chose 100MHz/133MHz/166MHz/
200MHz, depending on the Front Side
133 MHz
Bus of your CPU.
166 MHz
200 MHz
100~ 255 Press "Page Up" / "Page Down" key to overclock
the CPU Front Side Bus in 1MHz increment or
Press "Enter" key, then type the desired CPU
Front Side Bus.
SY-KT600 DRAGON Plus
56
Note
Default
Default
Default
Default

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents