Table of Contents
Advertisement
Menu Operations and Menu List
Menu Operations
Use the [SETUP] buttons or the mouse to make various settings.
1.
Display the menu.
Press the [MENU] button or right-click with the mouse to display the MAIN MENU.
fig.push-menu.eps
2.
Choose the item whose setting you want to change.
Use the up and down cursor buttons or the mouse to choose the item whose setting you want to change.
fig.cursor.eps
3.
Decide on the item whose setting you want to change.
If you're using the [MENU] button to perform this operation, press the [ENTER] button to enter into a level below. If you're using
the mouse to perform this operation, you can enter into a level below simply by selecting an item.
fig.push-enter.eps
4.
Change the setting value.
Use the left and right cursor buttons or the mouse to change the setting value.
5.
Quit the menu.
Press the [OK] button to end the display of the menu.
The values of menu settings are saved in the MVS-12's internal memory when you close the menu. Switching off the power before you quit the
menu screen causes no setting values to be saved. If you want to save the settings, quit the displayed menu screen before you switch off the
power.
26
Advertisement
Table of Contents
