Using the Mouse to Select the Output Destination and Source
You can use the mouse to assign sources to output destinations.
1.
Display the menu.
Right-click with the mouse to display the MAIN MENU.
fig.selector.eps
2.
Choose the output destination.
Use [MATRIX OUT] buttons [1] through [4] to select the output destination.
fig.matrix-mode.eps
3.
Assign the source.
Use the [INPUT SELECT] buttons to choose the channel of the source.
fig.drag-source.eps
4.
Quit the menu.
Go to the top right of the screen and click the [OK] button to make the displayed MAIN MENU disappear.
Use As a Matrix Switcher
23