Use As A Matrix Switcher; Using Buttons To Select The Output Destination And Source - Roland MVS-12 Owner's Manual

Use As a Matrix Switcher

Using Buttons to Select the Output Destination and Source

You can use the buttons on the front panel to assign source channels to output destinations [1] through [4].
1.
Select the output destination.
Use [MATRIX OUT] buttons [1] through [4] to select the channel for the output destination.
* Buttons [1] through [4] correspond to MATRIX OUT connectors 1 through 4.
fig.select-out-channel.eps
2.
Select the source.
Use the [INPUT SELECT] buttons to choose the channel of the source you want to assign to the output destination you selected in
step 1.
fig.select-source.eps
3.
Verify the assignment.
When you have finished assigning sources, press the same [MATRIX OUT] button. The [INPUT SELECT] button for the assigned
channel lights up.
* When an assignment has been made, the Matrix Out destination(s) appears in the upper right section of the source window. You can assign
the same source to all destinations from [1] to [4].
fig.assign-number.eps
When assigned to 1
22
When assigned to 3 When assigned to 1 through 4