Changing The Names Of Channels - Roland MVS-12 Owner's Manual

Changing the Names of Channels

By default, the respective sources are displayed with numbers from [CH1] through [CH12] or [1] through [4], but you can change these
to desired text strings up to eight characters. Your new channel names are saved in memory 1 through 4. You should select a desired
memory number first, then edit the new channel names for that memory. You can have up to four independent memories with
custom names.
* If any small letters are mixed in the text strings of the MATRIX OUT names changed from [1] through [4], all the letters shown on the image
output from PREVIEW jack are changed to capital letters automatically.
fig.name-change.eps
1.
Select the memory number.
Pre-select the memory number for which you want to save a changed name.
You can save a channel name for each individual memory number. You can save different names to memory buttons [1] through [4] and switch
the displayed names for individual events.
2.
Display the menu.
Press the [MENU] button or right-click with the mouse to display the MAIN MENU.
fig.push-menu.eps
3.
Select [NAME EDIT].
Use the up and down cursor buttons and the [ENTER] button or use the mouse to choose [NAME EDIT]. When this has been
selected, the display changes to the NAME EDIT screen.
fig.select-name-edit.eps
Other Features
31