Saeco PRIMEA LINE 2007 Technical & Service Manual page 71

7.13 Grinder adjustment/assembly and disassembly
Remove the coffee container and
rubber seal.
To remove the upper burr, rotate anti-
clockwise until it detaches from the
bayonet coupling.
PRIMEA Chapter 07
REV. 00 - Mar. 07
To remove the upper burr support, loosen
the three screws as indicated, then use a hex
key, turning it clockwise to release the grinder
support from the bayonet coupling.
On the lower burr, keep the incrementpin as
indicated locked in position and proceed as
shown in the figure above.
When refitting the upper burr support, take
care to reposition the mark as shown in the
photo.
18/22