Saeco PRIMEA LINE 2007 Technical & Service Manual page 37

5.4 Ring diagnosis function
Procedure for access to diagnostics mode.
Turn the appliance off and then on again or exit standby mode to enter the diagnostics menu, according to
the sequence shown in the fi gure.
When accessing the diagnostics menu, there is a timeout limit of 3 seconds between one selection and the
1
MENU
3
5.4.1 Beverage counters
1.1 Total espresso beverages
Total beverages
Water used (ml.)
1.2 Total coffee beverages
Total beverages
Water used (ml.)
1.3 Total caffè lungo beverages
Total beverages
Water used (ml.)
1.4 Total latte macchiato beverages
1.4.1 Total beverages
1.4.2 Water used (ml.)
1.5 Total cappuccino beverages
1.5.1 Total beverages
1.5.2 Water used (ml.)
1.6 Total espresso macchiato beverages
1.6.1 Total beverages
1.6.2 Water used (ml.)
1.7 Total hot milk beverages
1.7.1 Total beverages
1.7.2 Dispense time (sec.)
1.8 Total hot water beverages
1.8.1 Total beverages
Water used (ml.)
PRIMEA Chapter 05
REV. 00 - Mar. 07
1
3
A window is displayed showing the following options:
• Beverage counters
• Total counters
2
• Error counters
• Beverage settings
4
• System settings
• Exit diagnostics menu
Description of options available
2
4
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
not modifi able
15/20