Saeco PRIMEA LINE 2007 Technical & Service Manual page 74

7.16 Motor-driven drip tray.
Move the tray to the lower position.
Loosen the screws as shown and lift the
upper part off.
Remove the motor-driven tray from its seat
by pulling upwards.
PRIMEA 2007 Chapter 07
REV. 00 - Mar. 07
Loosen the screws securing the horizontal plate, remove the
connectors from the board and pull them out by gently lifting
thehorizontal plate.
For access to the sensors, loosen the two screws to
remove the casing below the drip tray.
Remove electrical connections (G) as indicated.
21/22