Saeco PRIMEA LINE 2007 Technical & Service Manual page 32

Grinder adjustment A (med. aroma)
Grinder adjustment B (med. aroma)
Off time
Calendar used**
Production date
Service date
Empty milk alert
Milk rinse warning time
Power board status
Aqua Prima water filter
Aqua Prima water filter - last appliance start-up
Stop coffee grounds
Coffee grounds counter
Water reserve limit
Water reserve counter
Software version
Serial number
*
Enter machine status
**
The day, hours and minutes of machine start-up and shutdown can be programmed in three time bands.
5.2.7 Emptying water circuit
This option must be run when the coffee maker is delivered by courier in periods subject to winter temperatures.
This function prevents damage to the appliance caused by very low temperatures.
The cycle empties the water circuit by means of the following sequence of operations performed automatically.
Selection of functions in diagnostics menu.
1. The multivalve must be in coffee position.
2. Both boilers reach the temperature of 130°C
3. The brew group stops in the brew position (UP) for 3 sec.
4. The unit returns to the home position (DOWN)
5. The multivalve sets to the hot water position for 1 sec.
6. The multivalve sets to the steam position for 1 sec.
PRIMEA Chapter 05
REV. 00 - Mar. 07
grinder pulses
grinder pulses
hours and minutes
days, hours, seconds
dd/mm/yy not modifiable
dd/mm/yy
minutes
minutes
dd/mm/yy
dd/mm/yy
no. grounds
no. grounds
turbine pulses
turbine pulses
cpu print v_--.--.--
cpu bootloader print v_--.--.--
power print v_--.--.--
60 ... 200 75
60 ... 200 60
0-3; 0-59
complete
not modifiable
complete
0 ... 60 20
5 ... 240 20
complete 17
complete 2006
complete 2006
0 ... 25 24
0 ... 25 24
0 ... 2000 750
0 ... 2000
complete
10/20
3
0
0
0