Saeco PRIMEA LINE 2007 Technical & Service Manual page 55

7.2 Right-side cover
PRIMEA 2007 Chapter 07
REV. 00 - Mar. 07
Move the drip tray to the lower limit position.
Disassemble the start touch sensors (E).
Remove the door (F) protecting the connec-
tion socket of the setting device, by means
of a #10 torx driver.
Loosen the screws as indicated.
Raise the rear section of the top cover slightly.
Push the upper section of the right side
cover upwards to release from hooks (C)
from slots (B).
To facilitate release, push the front section of
the cover downwards.
2/22