Saeco PRIMEA LINE 2007 Technical & Service Manual page 69

7. 11 OETIKER clamp assembly and disassembly
Boiler clamps
1
BOILER
Figure (1) shows the assembly position of the clamp on the boiler connector.
Multi-way valve clamps
Multi-way valve
2
Illustration (2) shows the assembly position of the clamp on the plastic connector of the multi-
way valve.
To remove the clamp, use a pincer as shown in (B)
PRIMEA 2007 Chapter 07
REV. 00 - Mar. 07
Use suitable pliers to tighten the clamp.
A
Ensure correct tightening (A) and positioning
as shown in illustrations (1) / (2).
B
16/22