Saeco PRIMEA LINE 2007 Technical & Service Manual page 4

1.1 Documentation required
The following technical documentation l is required for repairs:
Instruction booklet for specific model
Technical documentation for specific model (diagrams, exploded drawings)
1.2 Tools and equipment required
As well as the standard equipment, the tools listed below are required.
1 Special screwdriver with Torx T15 tip and Pozi Drive screwdriver for casing and work
on the grinder.
1 digital thermometer with full 200°C scale
This must be suitable for measuring in liquids and on surfaces.
1 set of pliers for Oetiker clamps
1 pincer
1.3 Safety warning
Before starting operations on the machine, consult the instruction booklet.
Observe all current standards related to the repair of domestic appliances.
Always disconnect the power plug from the mains before carrying out repairs. Simply turning
off the main switch is not sufficient to prevent electrical discharge.
This domestic appliance is rated as insulation class I.
Insulation and dielectric rigidity tests must be performed on completion of repairs.
PRIMEA 2007 Chapter 01
REV. 00 - Mar. 07
1/1