Canon Color ImageRUNNER C2058 Operator's Manual page 86

Copier Operator's Manual/Basic Operations
5
5
Press the [ORIGINAL SIZE] and [COPY SIZE]
keys, then enter each size using the number
keys.
◆ To make copies at the same zoom ratio in the
horizontal and vertical directions (ZOOM)
Press the [ORIGINAL SIZE] and [COPY SIZE]
key, and enter the desired values using the
number keys.
◆ To make copies at different zoom ratios in the
horizontal and vertical directions (XY ZOOM)
Press the [X] and [Y] keys, and enter each
desired value using the number keys.
Press the [mm] key to enter values in 1 mm increments.
MEMO:
●
Sizes designated in inches (millimeters) are converted to the copy
ratio (%) as follows:
copy ratio (%) = copy size (inches or mm) / original size (inches or mm) x 100
●
If the calculated copy ratio is smaller than 25%, it is set to 25%. If it
is larger than 400%, it is set to 400%.
Clear
●
Press the key to cancel the entered values.
C
How to enter values in Inches
6
6
Confirm the settings, then press the [OK] key.
7
7
Start
Press the key to begin making copies.
Chapter 3 Making Copies Using the Basic Features
3-31