Canon Color ImageRUNNER C2058 Operator's Manual page 68

Copier Operator's Manual/Basic Operations
Making two-sided copies with the stack bypass (2ND SIDE OF 2-SIDED OUTPUT)
NOTICE:
❍ Paper with a weight of 28-lb bond (105 g/m
stack bypass.
1
1
Make copies on the front side of the paper.
2
2
Place sheets of paper in the stack bypass with
the surface that has been copied placed face
down.
NOTICE:
❍ Do not re-copy using paper that has been output on copiers
and printers other than this machine.
❍ Do not make copies on the same side of the paper that has
already been copied. This may cause a malfunction.
❍ When making copies on the rear side of the paper that has
been output from this machine, set "2ND SIDE OF 2-SIDED
OUTPUT."
❍ "2ND SIDE OF 2-SIDED OUTPUT" need not be set when using
paper that has already been printed on.
❍ Curl down paper before use.
MEMO:
●
Place the paper so that the top is placed on the left side (fac-
ing the side of the front cover) of the tray.
3
3
Select the paper size, then press the [OK] key.
4
4
Select the paper material, then press the [2ND
SIDE OF 2-SIDED OUTPUT] key.
NOTICE:
❍ Do not select the [TRANSPARENCY] or [SPECIAL PAPER]
key.
Chapter 3 Making Copies Using the Basic Features
2 ) is recommended when making two-sided copies using the
3-13