Table of Contents
Advertisement
Copier Operator's Manual/Basic Operations
■ When Group is set
All copies of the same original page are automatically sorted and grouped together, and
output to the bins in the following way:
Originals
Four copy sets
are specified
1
1
2
2
3
3
4
4
MEMO:
●
The maximum number of copies that can be delivered to each of the bins is as follows:
LTR, LTR-R, STMT-R
11" x 17", LGL
●
For details on the group function, see the Reference Manual, Stapler Sorter Functions p. 6-21.
■ When Staple is set
Copies are automatically sorted into sets arranged in page order, output to the bins as
shown below, then automatically stapled.
Originals
Three copy sets
are specified
1
1
2
2
3
3
4
4
NOTICE:
❍ The following paper sizes can be stapled:
11" x 17", LGL, LTR, LTR-R
❍ Copies are automatically stapled only when the original is placed in the feeder (optional accessory). When
using the platen glass, staple copies manually after copying is complete.
❍ We recommend 28-lb bond (105 g/m
may result in degraded image quality or stapling failure.
MEMO:
●
When copying using the feeder (optional accessory), copying will stop automatically after outputting 18
sets if you have set the number of sets to 19 or more. Remove all of the paper from the 18 bins, place the
originals in the feeder again, and press the
●
If you place your originals on the platen glass, a maximum of 18 sets can be made.
●
The maximum number of copies that can be delivered to each of the bins is as follows:
LTR, LTR-R
30 sheets (20-lb bond (80 g/m
11" x 17"
25 sheets (20-lb bond (80 g/m
If the number of output copies exceeds the limit, the copies are stored without being stapled. In this case,
the Manual Staple mode cannot be performed either.
●
For details on the staple-sort function, see the Reference Manual, Stapler Sorter Functions p. 6-22.
Condition of output to each bin
Copy set 1
Copy set 2
1
1
1
1
1
1
1
1
30 sheets (20-lb bond (80 g/m
25 sheets (20-lb bond (80 g/m
Condition of output to each bin
Copy set 1
Copy set 2
1
1
2
2
3
3
4
4
2
) paper when stapling full-color, two-sided copies. Using other paper
Start
key. The remaining copies are made.
2
))
2
))
Chapter 3 Making Copies Using the Basic Features
Copy set 3
3
3
2
2
3
3
2
2
3
3
2
2
2
2
3
3
2
))
2
))
Copy set 3
1
1
1
1
2
2
2
2
3
3
3
3
4
4
4
4
Copy set 4
4
4
4
4
4
4
4
4
3-57
Advertisement
Chapters
Table of Contents
