Canon Color ImageRUNNER C2058 Operator's Manual page 158

Copier Operator's Manual/Basic Operations
NOTICE:
❍ Originals copied in the Image Separation mode must be of the same size.
❍ Some modes may not be able to be used with Image Separation.
MEMO:
●
The enlargement ratio is automatically set to match the selected paper size.
●
You can use TWO-SIDED/1 TO 2 and TWO-SIDED/1 TO 4 only when the feeder (optional accessory) is
attached.
●
You can also place STMT and LTR-size originals vertically when using 1 TO 2 and TWO-SIDED/1 TO 2.
When placed vertically, each page is divided into upper and lower sections.
1
1
Place your original.
MEMO:
●
When either 1 TO 2 or TWO-SIDED/1 TO 2 is selected, copies are
made vertically or horizontally depending on the orientation of your
original placed on the platen glass.
2
2
Press the [SPECIAL FEATURES] key.
The "Load **-size paper." message appears when no paper is set in
the selected drawer.
3
3
Press the [IMAGE SEPARATION] key.
Chapter 4 Making Various Types of Copies
4-43