Table of Contents
Advertisement
Locations and Functions
of Parts and Controls
2-1 Power Supply
a Battery attachment
Attach a battery pack, BP-GL65, BP-GL95, or BP-L60S.
Alternatively, by attaching an AC-DN10 AC Adaptor, you
can operate the camcorder from AC power.
b DC IN connector (XLR type, 4-pin, male)
To operate the camcorder using an AC power supply,
connect an AC-550/550CE AC Adaptor with the DC
output cable supplied with the adaptor.
To use an external battery, connect its DC output cable to
the DC IN connector.
When this connector is not being used, attach the supplied
XLR connector cover onto it.
c POWER switch
Turns the main power supply on and off.
d LIGHT switch
Determines how a video light connected to the LIGHT
connector is turned on and off.
c POWER switch
d LIGHT switch
AUTO: When the switch on the video light is in the on
MANUAL: You can turn the video light on or off
Chapter
a Battery attachment
b DC IN connector
position, putting the camcorder in recording mode
turns the video light on automatically. When using the
auto interval recording mode, the video light is
automatically turned on immediately before recording
starts.
manually, using its own switch.
2
17
Power Supply
Advertisement
Table of Contents
